 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Semiconductor SM3417-L / SM3417-L(B) LED Lamp Features * Green colored transparency lens type * 3mm(T-1) all plastic mold type * Low power consumption Outline Dimensions STRAIGHT TYPE 2.80~3.20 unit : mm STOPPER TYPE : (B) 2.80~3.20 5.10 ~ 5.50 2.70 ~ 3.10 5.10 ~ 5.50 2.70 ~ 3.10 1.20 Min. 4.70 ~ 5.70 0.70 M ax. 1.27 Typ. 23.00 Min. 0.70 23.00 M ax. Min. 1.00 Min. 1.00 Min. 2.54 Typ. 2.54 Typ. 3.50 ~ 3.90 M ax. 3.50 ~ 3.90 M ax. 12 3.60 ~ 4.00 12 3.60 ~ 4.00 0.45 0.45 PIN Connections 1. Anode 2. Cathode KSD-O2B014-001 1 SM3417-L / SM3417-L(B) Absolute Maximum Ratings Characteristic Power dissipation Forward current * Peak forward current Reverse voltage Operating temperature range Storage temperature range 2 1 (Ta=25oC) Symbol PD IF IFP VR Topr Tstg Rating 70 30 50 4 -3085 -40100 Unit mW mA mA V * Soldering temperature Tsol 260 for 10 seconds *1.Duty ratio = 1/10, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical / Optical Characteristics Characteristic Forward voltage (Ta=25oC) Symbol VF IV Test Condition IF= 20mA IF= 20mA IF= 20mA IF= 20mA VR=4V IF= 20mA Min. 2.0 43 565 - Typ. 568 30 22 Max. 2.4 155 571 10 - Unit V mcd nm nm uA deg * Luminous intensity Dominant wavelength Spectrum bandwidth Reverse current 3 D IR 1/2 * Half angle 4 *3. Luminous intensity maximum tolerance for each grade classification limit is 18% (The test result of IF=20mA is only for reference) *4. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity VF / IV / D Grade Classification (Ta=25) Test Condition @ IF=20mA Forward Voltage [V] 1 : 2.0~2.2 Luminous Intensity [mcd] J : 43~68 K : 68~100 2 : 2.2~2.4 L : 100~155 b : 568~571 Dominant Wavelength [nm] a : 565~568 (Do not use to combine grade classification. It must be used separately grade classification) KSD-O2B014-001 2 SM3417-L / SM3417-L(B) Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Forward Voltage VF [V] Forward Current IF [mA] Fig. 3 IF - Ta Fig.4 Spectrum Distribution Current IF [mA] Forward Ambient Temperature Ta [] Relative Intensity [%] Wavelength [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KSD-O2B014-001 3 SM3417-L / SM3417-L(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O2B014-001 4 |
Price & Availability of SM3417-LB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |